Prikaz osnovnih podataka o dokumentu

dc.contributor.authorAničić, Obrad
dc.contributor.authorJović, Srđan
dc.contributor.authorČamagić, Ivica
dc.contributor.authorRadojković, Mladen
dc.contributor.authorStanojević, Nenad
dc.date.accessioned2022-09-22T09:35:59Z
dc.date.available2022-09-22T09:35:59Z
dc.date.issued2018-05
dc.identifier.urihttps://platon.pr.ac.rs/handle/123456789/620
dc.description.abstractPurpose The main aim of the study was to measure the cutting forces and chip shapes based on different machining parameters. Design/methodology/approach To get the best optimal machining conditions, it is essential to use the best combination of machining parameters. Although some machining parameters are not important for the process, there are machining parameters which are very important for the machining process. Findings It is essential to determine which machining parameters are the most dominant to make the optimal machining conditions. Originality/value Six different chip shapes are obtained according to ISO standardization. It was determined that the different cutting forces occurred for the different chip shapes.en_US
dc.language.isoen_USen_US
dc.publisherSensor Reviewen_US
dc.rightsАуторство-Некомерцијално-Без прерада 3.0 САД*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/3.0/us/*
dc.titleMeasuring of cutting forces and chip shapes based on different machining parametersen_US
dc.title.alternativeSensor Reviewen_US
dc.typeclanak-u-casopisuen_US
dc.description.versionpublishedVersionen_US
dc.identifier.doi10.1108/SR-08-2017-0169
dc.subject.keywordsexpert systemsen_US
dc.subject.keywordsmachine intelligenceen_US
dc.type.mCategoryM23en_US
dc.type.mCategoryopenAccessen_US
dc.type.mCategoryM23en_US
dc.type.mCategoryopenAccessen_US
dc.identifier.ISSN0260-2288


Dokumenti

Thumbnail
Thumbnail

Ovaj rad se pojavljuje u sledećim kolekcijama

Prikaz osnovnih podataka o dokumentu

Ауторство-Некомерцијално-Без прерада 3.0 САД
Osim gde je drugačije navedeno, licenca ovog rada je opisana saАуторство-Некомерцијално-Без прерада 3.0 САД